21
20
Pick up with your hands
EN
두 손으로 들으십시오
KO
Your appliance is ready to be stored
EN
이제 제품을 보관할 수 있습니다
KO
使用
雙手取起
ZH
收納設備
ZH
PROBLEMS
CAUSES
SOLUTIONS
The appliance is
plugged in but
the soleplate is
not heating.
No power.
Check that the power socket is
connected properly or plug it
into another power socket.
The
O
n
/O
ff switch has not
been pressed.
Press the
O
n
/O
ff switch.
The
O
n
/
off light is flashing:
auto-off or stand-by is
activated.
Press the
O
n
/O
ff switch.
Your iron
produces little or
no steam.
The water reservoir is
empty.
Fill the reservoir.
The steam button has not
been pressed.
Press the steam button.
The internal system needs
to be refilled.
Press the steam button for
longer.
Do not empty the water
reservoir completely.
Brown streaks
come out of
the holes in the
soleplate and
stain the laundry.
You are using chemical
descaling agents or
additives in the water.
Never add these types
of products to the water
reservoir (see the paragraph
concerning the type of water
that can be used). Contact an
approved service centre.
The soleplate is dirty or has
browned and risks marking
the laundry.
Clean the soleplate with a
non-metallic sponge and
vacuum the holes on the
soleplate from time to time.
Your laundry is not
sufficiently rinsed or you
have ironed a new garment
before washing it.
M
ake sure that laundry is
rinsed thoroughly to remove
deposits of soap or chemicals
on new clothing that can stick
to the iron.
You are using starch.
S
pray the starch only on the
underside of the fabric that
you are ironing.
You are using
demineralised
/
distilled
water.
O
nly use water from the tap
or a blend of tap water and
demineralised
/
distilled water.
TROUBLE SHOOTING
Summary of Contents for CARE AND GO MINI UR1730M0
Page 1: ...1820009130 UR17XX TWEENY STEAMSHOT EN KO ZH...
Page 5: ...9 8 220V 16A 50 50...
Page 6: ...11 10 1 8 220V 16A...
Page 13: ...24...