112
113
ES
ES
112
113
EN
EN
Must the Bluetooth on my phone by constantly activated?
Bluetooth must be activated in order to synchronise the app with i-Companion xl.
Must the Bluetooth on my phone by constantly activated?
Bluetooth must be activated in order to synchronise the app with i-Companion xl.
USE IN UNCONNECTED MODE
Pastries (list of sub-programs)
Soups (list of sub-programs)
Stews (list of sub-programs)
Steamed dishes (list of sub-
programs)
USING THE CONTROL PANEL (B)
Selecting an automatic program:
Powering up your appliance
Your appliance has an on/off switch marked 0/1. Switch it to 1.
The LCD screen will display all the settings as ‘0’.
(See Fig. 9)
.
In unconnected mode, the i-Companion xl LCD screen is white.
AUTOMATIC PROGRAM MODE
1- Press the program you wish
to use
(B4)
. A bright dot will
appear above the program you
have selected. Each time you
press again, the various sub-
programs will be shown, one
after the other.
2- The pre-programed settings
can be modified for the time
of a recipe (depending on the
chosen recipe, ingredients and
quantities prepared). Press the
cooking temperature selector
(B2)
or the time selector
(B3)
: the chosen setting will
flash on the screen
(C6-C7)
.
3- Adjust the setting(s) using
the +/- selector
(B6)
.
4- When you have finished
modifying all your settings,
press the “start” button
(B5)
to start the program. When
your appliance is using cooking
mode, the red indicator light
(B3)
lights up to inform you
that cooking has started.
5- When the program has ended, the appliance
sounds 3 beeps.
6- At the end of the soups, P2 and P3 slow cook
and steam cooking programs, the appliance
will automatically switch to keep-warm mode
for 45 minutes to keep your meal hot until it
is ready to serve. On slow cook programs P2
and P3 and in manual mode, the appliance’s
motor operates at a specific speed, to keep
the food in good condition and prevent it
from sticking to the bottom of the bowl. To
stop the keep-warm mode, just press the ‘stop’
button
(B5)
. The keep-warm mode will stop
automatically if you open the lid, press the
triggers
(D2)
or remove the bowl.
The connection has failed
The icon above shows you that the connection has not been established.
Please repeat the following operations:
• Move close to i-Companion xl.
• Check that i-Companion xl is properly plugged into the socket and that the plug is working properly.
• Check that your smartphone/tablet is compatible (see compatibility list at www.tefal.com).
• Check that Bluetooth is activated on your smartphone/tablet.
• Start the pairing steps again, and consult the FAQs (frequently asked questions).
If there is still a problem, make sure that your smartphone/tablet is compatible
If you are using an Android device, make sure that it is one of the compatible models (see compatibility
list at www.tefal.com).
• Access the app menu to see our range of recipes.
In connected mode, during a step-by-step recipe, the
first reset ends the step, and the second reset ends
the recipe.
FAQs: FREQUENTLY ASKED QUESTIONS
Where should I put i-Companion xl?
• Put i-Companion xl on a flat, stable, heat resistant work surface.
• For the best connection between i-Companion xl and your smartphone/tablet, we recommend you make
any changes required to ensure the connection is at a reasonable distance.
• If the connection indicator
(C1)
is constantly lit, this shows that your devices are connected.
• If the connection is lost (the connection symbol is shown crossed out), move closer to i-Companion xl to
re-establish the connection.
What happens if the connection is lost during a recipe?
If the connection between i-Companion xl and your smartphone/tablet is lost during a recipe, the two
devices will be automatically synchronised as soon as the connection is re-established. You will be able to
carry on with your recipe from the step you were on when the connection was lost.
Can I use i-Companion xl without the app?
Your appliance may be used without the app. (See first use in unconnected mode).
For this, please refer to the ‘use of the appliance’ paragraph.
However, only the app will enable you to benefit from the many advantages of the connected product.
Can i-Companion xl be used with more than one smartphone or tablet?
If you wish, you can pair several devices with i-Companion xl. To do this, pair each device separately. (See
pairing).
However, only one device may be connected at a time.
Must the Bluetooth on my phone by constantly activated?
Bluetooth must be activated in order to synchronise the app with i-Companion xl.
Summary of Contents for FE90C160
