background image

When the
Auto-Stop
warning light is
on, it is normal for
the thermostat
light to remain
off.

8. Auto-Stop safety feature (depending on model)

- For your safety, the electronic system cuts off the power and

the auto-

stop indicator light flashes

- fig. 13

when :

• The iron remains motionless for more than 8 minutes on its heel.
• The iron remains flat or on its side for more than 30 seconds.
- To restart the iron, just move it gently until the warning light stops flashing.

9. Autoclean Catalys

®

Soleplate

- Your iron is equipped with a self-cleaning soleplate

- fig. 14

which works

by catalysis.

- Its exclusive coating helps continuously eliminate all the impurities

generated by normal use. It is recommended that you always stand your
iron on his heel to preserve its self-cleaning coating.

Dry Ironing

- Choose your ironing program.
- Set the steam control to DRY

- fig. 1

.

- You may start ironing when the thermostat light goes out.

Caring for your iron

BE CAREFUL ! Unplug your iron and let it cool down before cleaning it.

Cleaning the anti-calc valve (once per month)

- Unplug your iron and empty the water tank.

- To remove the antiscale valve, set your thermostat on the position MAX

- fig. 10

,

place the steam control on STEAM

, and the valve can now be removed from your

iron

- fig. 15

.

Never touch the end of the valve

- Soak the valve in a cup of white vinegar or plain lemon juice for 4 hours

- fig. 16

.

- Rinse the valve under running water.
- Replace the anti-calc valve.

The iron will not function

without the anti-calc valve

1. Self-cleaning
In order to extend the life of your iron, use the Self-Cleaning
function once a month.
- Set the iron to DRY

.

- Fill the water tank to maximum.
- Set the iron on his heel, with the water tank full, and set the thermostat

to MAX

- fig. 10

.

- When the thermostat light goes out, unplug the iron and hold it in a

horizontal position, over a sink.

- Remove the anti-calc valve.

Recommendations:
the self-cleaning
function helps to
slow down the
scaling up of your
iron.

6

UltimateAutoclean_GB.qxd:TEFAL193  27/05/08  9:07  Page 6

Summary of Contents for Ultimate Autoclean FV9430









Reviews: