background image

6

have been thoroughly instructed regarding use 

of the appliance, are supervised, and understand 

the risks involved. Children shall not play with the 

appliance. Cleaning and user maintenance shall 

not be made by children without supervision. 

Keep the iron and its cord out of reach of children 

less than 8 years of age when it is in use until it 

has cooled down completely.

•   The surfaces of your appliance can reach 

very high temperatures when functioning, 

which may cause burns. Do not touch the 

hot surfaces of the appliance (accessible 

metal parts and plastic parts adjacent to the 

metallic parts).

•  Never leave the appliance unattended when it 

is connected to the mains. Before storing the 

appliance, once it is unplugged, please wait until 

it has cooled down completely (around 1 hour).

•  The appliance must not be used if it has been 

dropped, if it has any visible damage, if it leaks, 

or if it functions abnormally in any way. Do not 

attempt to dismantle your appliance: have it 

examined at an Approved Service Centre to avoid 

any danger.

•  The iron should only be used with the base 

provided (for cordless irons).

Summary of Contents for Ultimate Pure























Reviews: