31
Important Instructions:
The appliances mentioned in this document are only intended for preservation and cooling of
beverages in bottles and cans.
Read the manual In order to obtain full benefit of the appliance.
It is the user’s responsibility to utilize the appliance according to the instructions.
Contact the dealer immediately in case of any defects.
The appliance is only for indoor use.
The appliance should be placed in a dry sufficiently ventilated room.
The appliance should not be placed near a source of heat or direct sunlight.
The appliance should not be placed near a ventilation or air condition system.
Note that all electrical appliances can cause danger.
Do not store explosives such as gas, petrol, ether or similar substances in the appliance.
Asbestos nor CFC have been used in the production of the appliance.
The oil in the compressor does not contain PCB.
- THIS APPLIANCE MUST ALWAYS HAVE AN EARTHED PLUG!
- AT REPAIR ALWAYS UNPLUG THE APPLIANCE!
at
- ONLY FOR APPLIANCES WITH REFRIGERANT R600a!
This appliance contains a flammable refrigerant, so make sure of good ventilation around the
appliance.
Do not use mechanical devices when defrosting, this can cause leakage of the cooling system.
Do not use electrical appliances inside the refrigerated storage compartment.
Any repair of the appliance should be carried out by a skilled technician (EN 60335-2-89: 2010).
Unpacking and Installation:
Remove the packing and check that the cabinet has no transport damage.
Any transport damages should be reported to the transport company and noted on the delivery note.
When building-in ensure a distance of at least 50 cm behind the appliance and above the appliance.
Make sure that the air intake at the bottom panel is not blocked.
Place the appliance in a level position for correct functioning. This can be achieved by adjusting the
adjustable feet:
Summary of Contents for FS1002S
