© by WilTec Wildanger Technik GmbH
Item 54001 and more
Page 8
05 2022
-1
Notes on installing the pond clarifier (optional)
CUV-1xx and CUV-2xx
•
The following pictures will help you to mount to your filter a clarifier belonging to the series 1 or
2. All you need is 2× Ox-Add and two matching sealings (included in the supply).
•
With the help of the Ox-Adds, fix the attached clarifier to the inside of the filter.
•
Make sure that the opening of the Ox-Adds is facing down to ensure the correct function of the
filter. Depending on the thread-cutting, it may be necessary to remove the inner-lying sealing.
CUV-3xx and CUV-6xx
•
The following information will help you to mount to your CBF-filter a clarifier belonging to the
series 3 and series 6.
•
Required parts from the range of accessories of the clarifier and pond filter:
o
2× Ox-Add
o
2× connector
o
2× rubber ring sealing
⌀
43
mm
o
2× rubber ring sealing
⌀
58
mm
