© by WilTec Wildanger Technik GmbH
Item 50337, 50338, 50248, 50249, 50283
Page 3
05 2022
-1
Introduction
Thank you for purchasing this quality product.
To minimise the risk of injury we urge that our clients
take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Safety guideline
BEWARE:
The use of this device is allowed on standing water bodies, garden pond water or swimming ponds and
their surrounding areas only with fault current protection-switch with a triggering nominal current up to
30
mA (according to VDE 0100
Article 702 and 738).
The device is not suitable for use in swimming pools, paddling pools, and other water bodies in which
during operation people could be present. The operation of the device during the presence of people in
the danger zone is not allowed. Ask your electrician.
The device is not intended for use by persons (including children) with impaired or limited physical,
sensory, and mental abilities, or lack of experience and/or real knowledge, unless they are supervised
by a person responsible for their safety or follow the instructions made by this person on how to use the
device correctly.
Children should be supervised to make sure that they do not play with the device.
ATTENTION:
•
Run a visual inspection of the device before every use. Do not use the device if the safety
appliances are damaged or worn out. Never override safety regulations.
•
Use the device exclusively according to the intended purpose stated in the instructions for use.
•
You are responsible for the safety of the working environment.
•
If the cable or the plug is damaged due to external influences the cable must not be repaired! It
must be replaced with a new one. This work can be carried out only by an electrician.
•
The voltage indicated on the type plate of the device of 230
V alternating voltage must corre-
spond to the existent mains voltage.
•
Never lift, carry, or suspend the device by using the power cable.
•
Make sure that the electrical plug connection is placed in a flood-proof area and is protected
from moisture.
•
Before working on the pond pump disconnect the appliance by taking the plug out of the socket.
•
Avoid exposing the appliance to a direct water jet or rain.
•
The user is responsible for the compliance with location specific safety and installing regula-
tions. Ask an electrician.
•
Consequential damage arising from flooded rooms caused by dysfunctions of the appliance
must be avoided by means of the appropriate measures (e.g., installing an alarm system, re-
serve pump).
•
In case of malfunction the repair work can be carried out only by a qualified electrician.
•
The appliance must not run dry or with a completely closed intake port. The manufacturer’s
guarantee is no longer valid if the damage is caused by dry running.
•
The appliance must not be used for swimming pools.
•
The device cannot be employed for potable water circuits.
WARNING:
Read carefully all the safety guidelines and the instructions.
Non-compliance with the safety rules
and regulations can lead to an electric shock, fire, and/or serious injury. Keep the instructions and the
safety guidelines in a safe place in case you need them in the future.
