10
programs of hydromassage
Program setting - the hydromassage must be marked
» by depressing the button
the section of programs of hydromassage
box is activated
» the program selection is set by means of step buttons
- 3 programs
» setting of frequency (changing of nozzle section)
range : 1 – 4
» by the next pressing of button
the selected program will star
Switching off the program mode
»
S w i t c h i n g off the program mode
Note :
»
the pre-selected programs may be adjusted during running time
(nozzle selection, water stream intensity, water heating, massage duration)
the programs work on condition the small bath tub is filled with water
programs of hydromassage
modification of hydromassage programs
The hydromassage box contains three pre-selected programs which may, during its running,
be modified (selection of nozzles, stream water intensity, water heating, massage duration)
Change of nozzle sections
» the individual sections of nozzles may be switched on or off by means of hydromas-
sage
press buttons
» side
nozzles
» upper
nozzle
» back
nozzles
Change of water stream intensity
» after pressing one of hydromassage buttons, the intensity of water
stream may be adjusted by means of step buttons (24 up to 65)
Change of massage duration
» after pressing one of hydromassage buttons, the duration
of hydromassage may be adjusted by means of step buttons ( 2 up to 30)
Change of additional water heating
» after pressing the button
the actual water temperature is displayed
»
the required setting of water heating is set by means of step buttons,
range : 18 – 40°C
» 10 seconds after setting of temperature heating, the actual water
temperature is displayed
Note : the change in programs cannot be stored into the memory of hydromassage box
modification of hydromassage programs
