11
steam (turkish) bath - (series Variant, Professional)
For this function it is not necessary to fill the small bath tub with water (but due to the pleasant
feeling of warm, we recommend to have the bath tub filled with water)
Setting of steam bath
» set the thermostatic battery to 38°C (to increase the service life and efficiency of steam
generator)
» activate the steam bath by pressing the button ; the display shows
the actual temperature inside the box
» set the steam bath temperature by means of step buttons ;
the range : 24 – 48°C
- 10 seconds after selection of steam temperature, the display
shows again the actual temperature in the box
» set the duration of steam bath by means of step buttons; range : 5 – 30 minutes
» after setting, start the steam bath by pressing the button
- after the required temperature is reached, the preset time will be counted down
To stop the operation of steam bath
» by pressing the button or whatever button of hydromassage
» by opening the shower door – the automatic blocking of the system
After completing of steam bath, the automatic flushing of steam generator is performed
» After 10 minutes from switching off the steam bath, the automatic flushing of steam
generator by clean water will start for a period of 3 minutes. The content of steam
generator is emptied into the waste device
.
» This process is not shown on the display and does not block any function
steam (turkish) bath
lighting of the box
Setting of lighting of the hydromassage box
» switching the box on or off is performed by depressing the button
» the light intensity is regulated by means of step buttons, the range is : 1 up to 65
CAUTION : the lighting in the box may be used only at its usage
- after 10 minutes of a rest status, the box lighting is switched off automatically
lighting of the box
