13
MAINTENANCE OF THE BOX - STEAM BATH
Cleaning (sanitation) of steam generator – to perform after 5 hour operation of the steam
bath.
» After all the functions are switched off, the display shows the time of day
or the inscription STOP ,
» After passing of 15 minutes at least since the last intervention on the controller,
hold the button of steam bath until the display shows the inscription SA.27.
» Into the sanitation inlet pour 50 ml of an agent for dissolution of the scale
» By depressing the button of the steam bath the process of automatic cleaning of steam
gen erator is activated (the LED diode lights in green light, the blinking dot on the display
indicates the time of running sanitation).
» During sanitation process, the steam bath is blocked, other functions are available
to
the
user.
» The sanitation process lasts 27 minutes and cannot be interrupted
Caution :
» cleaning (sanitation) of steam generator is an essential part of the failure-free opera-
tion of steam bath. If not keeping this instruction you may cause the defect of the box, which is
not covered by the warranty !!!
MAINTENANCE OF THE BOX - STEAM BATH
MAINTENANCE OF THE BOX – HYDROMASSAGE BATH
– type Classic, Variant, Professional
» Fill the small bath tub with warm water
» Into the water pour cca 50 ml of cleaning solution
» Activate the hydromassage – all sections of nozzles
» Set the time of hydromassage for about 5 minutes.
» Start the hydromassage by closing the door
» After the sanitation is finished, leave the shower door opened for quicker
drying of the box.
Caution :
» For maintenance do not use the agents which contain the solid particles.
Prevent that the surface of the product touches the concentrated acids, lye and
volatile
substances
!!!
MAINTENANCE OF THE BOX – HYDROMASSAGE BATH
