Electric brushing robot
22-32
ibrush
ibrush
Automatic mode:
9
Pressing the automatic mode button on the remote control, at the
same time as the unlock button, activates the brush rotation to the
right, changing direction every 10 seconds.
The LED strip will change direction according to the activated
rotation, remaining in continuous movement up to the selected
speed.
To link a controller, press the button for 10 seconds. The LED strip
will turn blue and flash for 20 seconds.
Then press the left turn button at the same time as the unlock button.
The remote control will be linked.
After 20 seconds the LED strip will return to its normal state and work
can continue.
System that serves to protect the shaft against breakage, blocking
its operation.
The LED strip will turn red for 5 seconds. After this time the LED strip
will turn green and work can be resumed.
Make sure that the brush is not blocked, is the correct size and is not
working at high speed.
If the LED strip stays red it indicates an internal problem with your
equipment. Contact TEINNOVA Customer Service.
Link remote control:
Proaxis system:
10
11
operating instructions
