19
CONTROL INSTRUCTION
The remote control will arrive already programmed with the hood, if for any reason the remote
control loses communication with the hood, perform the following procedure:
· Disconnect the hood from the power supply;
· Wait a few seconds and restore the power and within 10 seconds press the “P1” and
“PT”
buttons at the same time for about 3 seconds.
The remote control will be operational again.
FUNCTIONS
P0:
MOTOR ON / OFF key.
If selected with the engine off, the display shows a zero “0” for about 1 second.
P1:
key to decrease the motor speed, if the hood is in 1st speed it switches off the motor.
P2:
key to increase the motor speed, if the hood is off it switches on the 1st speed, pressing a
second time activates the 2nd speed, pressing a third time activates the 3rd speed, pressing a
fourth time activates the 4th speed, pressing a fifth time activates the 5th speed (1st speed
intensive) (**), pressing a sixth time activates the 6th speed (2nd speed intensive) (**).
The numbers of the selected speeds appear on the display (“1”, “2”, “3”, “4”, “5”, “6”).
Summary of Contents for 113100004
