50
Code N
º
: PRM-00-0001
Revised / Date
: 2006
I
NSTALLER
’
S
M
ANUAL
Page N
º
: 50 of 95
5.1 I
NSTALLATION OF DECORATIVE HOOD
DX ISLA
This hood should be fitted in the following way:
1) Using the support
(O)
, mark and make a small hole for the screws
(S)
(8x45) in the ceiling.
2) Secure the support with the corresponding screws
(S)
.
3) Place the upper part of the internal structure
(A6)
on the support
(O)
, with screws
(Q)
(M6x16).
4) Adjust the decorative supplementary piece
(U)
, carefully securing it with the screws
(V)
(M4)
supplied with the piece.
5) Insert piece
(B)
if the interior tube (not supplied) has a diametre of 120 mm.
6) Secure the interior tube with a jubilee clip (not supplied) to
(B)
, or on the exit section of the
motor, as appropriate.
7) Insert the upper tube cover
(A8)
inside the lower tube cover
(A9).