11
GB
Index
Page
Description of the appliance
11
Instructions for use
11
Cleaning and maintenance 12
Problem solving 12
Sizes and specifications
12
Accessories supplied
13
Installation
13
Active charcoal filters
13
A
Electronic programmer control box
with iluminated buttons to control
speed and light.
B
Metal filters.
C
Lamps with four bulbs - 20 W (G-4).
D, E
Vertically adjustable tubecovers.
F
Decorative part.
Switch on the extractor fan a few minutes
before you start to cook in order to ensure that
a steady air flow has been established before
fumes appear.
Allow the extractor fan to run for several
minutes after you have finished cooking
(between 3 to 5 minutes) in order to expel all
the grease from the outlet duct. This prevents
the return of grease, smoke and smells.
Proceed as follows:
1.- Choose the required speed.
2.- Press "timer". The light will begin to flash.
The duration of the “timer” is 10 min.
During the programmed time, fan speed can
be changed.
The intensive speed is autoprogramed and
will change to speed 2 after approximately 10
minutes.
Description of the appliance
Instructions for use
You may control the kitchen hood by
operating the controls as shown in the
diagram.
Programming timer