Teka DX-90 Vr. 03, Instruction Manual

11

ENG 

Index

Page

Description of the appliance          

11

Instructions for use                

11

Cleaning and maintenance                   12

Problem solving                                   12

Sizes and specifications     

12

Accessories supplied                   

13

Installation                               

13

Active charcoal filters

13

A

Electronic programmer control box
with TOUCH CONTROL technology to
control speed, light and  power in use
indicators.

B

Metal filters.

C

Lamps - 20 W (G-4).

D, E

Vertically adjustable tubecovers.

F

Decorative part (Not incluided).

Switch on the extractor fan a few minutes
before you start to cook in order to ensure that
a steady air flow has been established before
fumes appear.

Allow the extractor fan to run for several
minutes after you have finished cooking
(between 3 to 5 minutes) in order to expel all
the grease from the outlet duct. This prevents
the return of grease, smoke and smells.

Proceed as follows:
1) Turn the kitchen hood on and choose the

required speed.

2) Press "timer".The "power indicator" will

flash.

3) Select the required time by pressing the

increase and decrease speed selectors.
There is a variation of 5 in 5 minutes.
(Min.= 5 min.; Max.= 20 min.).

4) Once the required time has been selected,

press "timer" again to memorise the
program.

5) The kitchen hood will turn itself off once the

programed time has finished.

Instructions for use

Description  of the appliance

You may control the kitchen hood by
operating the controls as shown in the
diagram.

Programming timer