9
Before calling the repair service, make the
following checks:
If Something Doesn’t Work
•
Remove the filter to access the light bulbs.
•
Make sure that the hood has previously
been disconnected from the mains supply
and that the bulbs to be replaced are not
hot.
•
The maximum bulb rating is 40 W.
8
Changing light bulbs
Fault
Possible Cause
Solution
Hood does not work
Mains cable not connected
Connect mains cable
Power not reaching plug
Check/repair mains supply
Hood not extracting
sufficiently or vibrating
Filter saturated with grease
Clean or replace filter
Obstruction in venting duct
Remove obstruction
Inadequate venting duct
Contact installer and follow
the instructions in this manual
Lights do not work
Bulbs blown
Replace bulbs
Bulbs loose
Tighten up bulbs
Summary of Contents for GF-T
Page 1: ......