11
ENG
Index
Page
Description of the appliance
11
Instructions for use
11
Cleaning and maintenance 12
Problem solving 12
Sizes and specifications
12
Accessories supplied
13
Installation
13
Active charcoal filters
13
A
Electronic programmer control box
with buttons to control speed, light and
power in use indicators.
B
Metal filters.
C
Lamps - 20 W (G-4).
D, E
Vertically adjustable tubecovers.
F
Decorative part (Not incluided).
Switch on the extractor fan a few minutes
before you start to cook in order to ensure that
a steady air flow has been established before
fumes appear.
Allow the extractor fan to run for several
minutes after you have finished cooking
(between 3 to 5 minutes) in order to expel all
the grease from the outlet duct. This prevents
the return of grease, smoke and smells.
Proceed as follows:
1.- Choose the required speed.
2.- Press "timer". The light will begin to flash.
3.- Select the intake time by pressing the
corresponding button (see figure).
4.- Once the required time has been selected,
press "timer" again to memorise the program.
During the programmed time you can change
fan speed except to suction intensive.
The intensive speed can only be selected
manually and will change to speed 2 after
approximately 10 minutes.
Instructions for use
Description of the appliance
You may control the kitchen hood by
operating the controls as shown in the
diagram.
Programming timer
ND_ISLA_03.qxd 18/4/05 16:40 Página 11
