Tekmatix TMFM - 65, Operation Manual

20

EMPTY UNIT

FILL WATER TANK

READY

Transport

Please save the packaging of the coffee machine for future 

transportation.

Make sure to empty water inside the machine before transportation, 

otherwise, it will damage the machine.

After emptying the waterway, please wipe the machine both 

inside and outside to dry.

Once the empty waterway program was executed, the system 

will rerun to the program of “first-time use”, when the coffee 

machine is used again.( 

refer to

 P6, First-time use)

While emptying the waterway, there will be a high-temperature 

steam sprays from coffee spout. Please pay special attention to 

avoid being scalded.

●

●

●

●

●

Transport and recycle

The machine is on the status of “READY”.

Take out the water tank, and the machine 

indicates “FILL WATER TANK”.

long pressing the cleaning button until 

the screen shows "EMPTY UNIT", the 

machine begins to clean up the waterway 

automatically, and steam will spray from 

the coffee spout, please keep distance to 

avoid scalding.

After emptying the waterway, the machine 

will automatically power off. Take the drip 

tray out after the power is switched off, and 

clear the water in the drip tray.

EMPTY UNIT

Recycle

When recycling the machine, some inner parts can be 

recycled to use again. Please pay attention to recycle them 

for environmental protection.

Voltage/Frequency

220 - 240 V~ 50 Hz /60 Hz

Power

1400 W

Pump pressure

19 bar

Capacity of water tank

1.8 L

Capacity of bean container 

250 g

Capacity of coffee grounds container

15 cakes

Capacity of the brewing unit

7 - 14 g

Adjusting height of coffee spout

80 - 140 mm

Length of power cord

1.2 m

Net weight

13 kg

Dimensions (Length×Width×Height)

450mm

×

302mm

×

370mm

Technical Data