21
4
ASSEMBLY
OTHER FEATURES
Overload Warning
If a metal object or highly magnetic soil are too close to the searchcoil, the
detector will “overload.”
“
” will appear on the screen and the detector will make a rapid, repeating
mid-tone warning sound.
Overload will not harm the detector, but the detector will not function under
these conditions.
Raise the searchcoil to search at a greater distance, or move to a different location.
Unit of Measure (U/M)
The depth indicator in Pinpoint Mode can display either centimeters (CM) or
inches (IN).
The default unit of measure is centimeters (CM).
To change the unit of measure:
1. Start with the detector turned OFF.
2. Press-and-hold
.
3. Press
.
Continue to hold down
.
4. Quickly release and then immediately press-and-hold
again to toggle
between CM and IN.
5. When the desired U/M appears on the screen, release
.
The detector will now operate with the desired U/M, even after the detector
has been powered down.
To change the U/M again, repeat the procedure.
Memory
To store the current settings (SENS, DISC and VOL):
1. Start with the detector turned ON.
2. Select all desired settings.
3. Press-and-hold
for 8 seconds.
4.
When the three menu selections appear at the
bottom of the screen, release
.
When you turn the detector ON for future use, your detector will resume
operation with your programmed settings.
Reset
To return all detector settings to the factory defaults:
1. Start with the detector turned OFF.
2. Press-and-hold
.
3. Press
.
4. Release
.
The 2-digit number displayed is the software revision number.
Adjusting the Armrest
The armrest may be moved forward or backwards by removing the single screw
and nut, and then repositioning the 2-piece armrest. Users with shorter arms
may find the armrest more comfortable in the forward position. In order to move
the armrest backwards, the plastic plug must be removed from the aluminum
tube.
Armrest Strap
(optional accessory)
The strap is available for purchase as a separate accessory. Some users prefer
to use the strap when swing the detector vigorously, in order to hold the detector
secure against the arm.
The detector can also be used without the strap, with no compromise to detector
balance and stability under most conditions.
Plastic Plug
Item # 2021112000
