å
Carefully turn your unit over onto its front edges. Lay the
BACK (H) over your unit.
å
Make equal margins along all four edges of the BACK (H).
Push on opposite corners of your unit if needed to make
it "square".
å
Fasten the BACK (H) to your unit using the NAILS (1N).
å
NOTE: Be sure to tap NAILS into the holes that line up
over the SHELF (G).
å
NOTE: The perforations must be located as shown
and have been provided for access through the BACK.
Carefully cut out the holes needed.
Step 15
Page 19
These holes must line up
over the SHELF (G).
The perforations must be here.
H
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution
NAIL
(25 used in this step)
1N
