Step 4
å
Flip the ENDS (A and B) and UPRIGHT (C) over onto their
opposite surface.
å
Turn six BLACK 9/16" FLAT HEAD SCREWS (32S) into
the ENDS (A and B) and UPRIGHT (C) until the shoulders
of the SCREWS rest on the surface of each one.
å
Slide the LOWER END MOLDINGS (U) onto the ENDS and
UPRIGHT. Line up the grooves in the MOLDINGS over the
heads of the SCREWS in the ENDS and UPRIGHT.
Page 8
B
C
A
U
U
U
These edges
should be even.
These edges
should be even.
These edges
should be even.
Apply pressure with your hands as
you guide the MOLDINGS over the
SCREWS and onto the ENDS.
Shoulder
BLACK 9/16" FLAT HEAD SCREW
(6 used in this step)
32S
