Step 1
å
Your Wall Desk is intended to be fastened to wall studs using the included hardware.
å
If you need to drywall hang this unit, purchase a drywall anchor which is rated to support a MINIMUM of
80 lbs. Follow the instructions provided with the anchoring hardware.
å
Determine the desired height of the Wall Desk on your wall and subtract 7". Mark this location on your wall.
This will be the bottom edge of the WALL SUPPORT (A).
å
Locate and mark the wall stud locations on your wall.
å
NOTE: BE SURE THE TWO MARKS ON THE STUDS ARE LEVEL BEFORE DRILLING.
7"
Desired upper line of wall unit
Lower edge line of WALL SUPPORT
Wall
Stud
Angled edge
Page 4
