å
Push two CROSS-SLOTTED DOWELS (24F) into the LONG BRACE (K)
as shown.
å
NOTE: The threads in the DOWEL should be pointed toward the hole in
the edge of the LONG BRACE.
å
First, fi ll the holes in the ends of the LONG BRACE (K) 1/4 to 1/2 full
with GLUE (177M). Then, insert the WOOD DOWELS (15F) into the
holes. Wipe away the excess GLUE.
å
Now, fi ll the hole in the LEFT BRACE (G) 1/4 to 1/2 full with GLUE.
å
Fasten the LONG BRACE (K) to the LEFT BRACE (G). Use one BLACK
2-3/8" FLAT HEAD BOLT (103S).
å
NOTE: The BOLT will thread into the DOWEL in the LONG BRACE.
å
NOTE: Be sure the WOOD DOWEL in the LONG BRACE inserts into the
LEFT BRACE. Wipe away the excess GLUE.
Step 11
Page 16
24F
The long slot should face up
and be parallel to the long
edges of the SIDE SKIRTS.
K
K
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely diffi cult.
Caution
!
15F
G
103S
BLACK 2-3/8" FLAT HEAD BOLT
(1 used for the LONG BRACE)
Sur
face with slotted do
wels
177M
Fill the holes 1/4 to 1/2 full with GLUE.
