å
First, fi ll the holes in the edge of the TOP SHORT BRACE (G) 1/4 to 1/2 full with GLUE (54M). Then, insert four WOOD
DOWELS (15F) into the holes. Wipe away the excess GLUE.
å
Next, place a dab of GLUE (54M) onto each WOOD DOWEL in the TOP SHORT BRACE (G) and LOWER LONG BRACE (J).
å
Now, place the LONG LEGS PANELS (B) onto the WOOD DOWELS in the TOP SHORT BRACE (G). Wipe away the
excess GLUE.
å
NOTE: Be sure the CAM DOWELS in the OUTER LEG PANELS (D) insert into the holes in the TOPS (A). Also, be sure the
WOOD DOWELS in the LOWER LONG BRACE (J) insert into the holes in the LOWER SHORT BRACE (I).
å
NOTE: Tap into place using a rubber mallet.
å
Fasten the OUTER LEG PANELS (D) to the TOPS (A). Tighten two HIDDEN CAMS.
å
Fasten the LOWER SHORT BRACE (I) to the LOWER LONG BRACE (J). Use one SILVER 2" FLAT HEAD SCREW (57S).
Step 11
Page 15
Fill the holes 1/4 to 1/2 full with GLUE.
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely diffi
cult.
Caution
!
54M
B
A
A
G
B
Arrow
Minimum
190 degrees
Maximum
210 degrees
15F
D
D
I
J
SILVER 2" FLAT HEAD SCREW
(1 used in this step)
57S
