Step 6
å
Fasten the MOLDINGS (M and N) to the TOP (E). Tighten
two TWIST-LOCK® FASTENERS.
Page 10
E
M
N
How to use the SAUDER TWIST-LOCK
®
FASTENER
1. Insert the dowel end of the FASTENER into the hole of the
adjoining part.
NOTE: The dowel end of the FASTENER must remain fully
inserted in the hole of the adjoining part while locking
the FASTENER.
2. Tighten the FASTENER with a Phillips screwdriver as tight
as possible.
Dowel end