Step 34
Page 39
å
Push the RUBBER SLEEVES (2R) over the METAL
PINS (1R). Insert the METAL PINS into the hole
locations of your choice in the LEFT END (B2) and
LEFT UPRIGHT (D2). Set the ADJUSTABLE SHELF (N)
onto the METAL PINS.
å
To insert the drawer into your unit, tip the front of
the drawer down and drop the rollers on the drawer
behind the rollers on the unit. Lift the front of the
drawer up and slide it into the unit. Repeat this step to
insert the pencil drawer.
å
To insert the large drawer into your unit, line up
the EXTENSION SLIDES on the drawer with the
EXTENSION RAILS on the unit and push the drawer
into the unit until the drawer is fully inserted. The
drawer will push in hard until it is all the way in, then it
will slide in and out easier.
(4 used)
2R
1R
B2
D2
60 lbs.
40 lbs.
10 lbs.
5 lbs.
30 lbs.
20 lbs.
30 lbs.
40 lbs.
N
PENCIL DRAWER ON RIGHT
PENCIL DRAWER ON LEFT
