background image

Step 3

 

å

Carefully stand your unit upright.

 

å

Apply the WARNING LABEL (6) to the TOP (C). You should be able to read the label when the TV is removed from the
unit. When the TV is in place, it should hide the label. Peel off  the backing and apply the label as shown in the diagram.

 

å

NOTE: This is a permanent label intended to last for the life of the product. Once applied, do not try to remove it.

 

å

NOTE: Please read the back pages of the instruction booklet for important safety information.

 

å

This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry.

35 lbs.

30 lbs.

40 lbs.

Page 6

  And to celebrate, why not share your success story?

Never use this furniture 
with a TV that is too large or 
too heavy. Severe injury or 
death can occur. The TV and 
furniture will be unstable 
and may tip.

-The TV 

must 

weigh less 

than 
-The base of the TV 

must

 

be able to sit completely on 
the shelf.

Refer to instruction book 
for complete safety 
information.

Note: This is a permanent 
label. Do not try to remove. 
Surface will be damaged. 

WARNING            

35 lbs.

C

6

Summary of Contents for Canal Heights Console 5419230








Reviews: