Step 3
Page 7
1
st
4
th
96
å
Carefully stand your unit upright against the wall in its final location.
å
1
st
- Use the FURNITURE TIPPING RESTRAINT KIT (96) for added stability. Fasten the SAFETY STRAP to the TOP (B)
using the short screw.
å
The following instructions show your unit being fastened to a wall stud. If you are not fastening your unit to a wall stud,
go to the next step now.
å
2
nd
- Locate the center of a stud in your wall near your unit and mark it with a pencil.
å
3
rd
- Drill a 1/8" hole on the mark and into the stud in your wall.
å
4
th
- Fasten the unit to the wall. Use the long screw through the other end of the strap and into the 1/8" hole.
å
NOTE: Please read the back pages of the instruction booklet for important safety information.
å
This completes assembly. Clean with a damp cloth. Wipe dry.
Electric drill with 1/8" bit
3
rd
Mark and drill a 1/8"
hole into the wall stud.
2
nd
B
Use the short screw
through the hole in the
strap and into the TOP (B).
15 lb
s.
35 lb
s.
35 lb
s.
35 lb
s.
35 lb
s.
