å
Insert the GROMMET (10P) and GROMMET CAP (1P) into the large hole in the BOTTOM (E).
å
To insert the drawer into your unit, tip the front of the drawer down and drop the glides on the drawer behind the glides on
the unit. Lift the front of the drawer up and slide it into the unit.
å
Push the RUBBER SLEEVES (2R) over the METAL PINS (1R). Insert the METAL PINS (1R) into the hole locations of your
choice in the LEFT END (B) and UPRIGHTS (C and D). Set the ADJUSTABLE SHELVES (G and H) onto the METAL PINS.
Step 22
1P
10P
E
Place the glide on the SLIDE
behind the glide on the RAIL.
Page 28
(8 used)
C
D
H
G
B
2R
1R
