å
Fasten the CABINET RIGHT (5) to the LEFT UPRIGHT LEG (B). Use three BLACK 1/2" FLAT HEAD SCREWS (19).
å
Fasten the CABINET LEFT (6) to the LEFT END LEG (A). Use three BLACK 1/2" FLAT HEAD SCREWS (19).
å
Separate the EXTENSION SLIDES (2) from the EXTENSION RAILS (1) as shown in the upper diagram below. Be
prepared, the parts are greasy.
å
Fasten the EXTENSION RAILS (1) to the LEFT END LEG (A) and LEFT UPRIGHT LEG (B). Use six BLACK 1/2" FLAT
HEAD SCREWS (19).
å
NOTE: For each EXTENSION RAIL, turn a SCREW into the hole shown in the enlarged diagram. Then, slide the inner
cartridge of the EXTENSION RAIL in to fi nd the other holes that line up with the holes in the LEFT LEGS. Turn a
SCREW into those holes.
å
NOTE: The EXTENSION SLIDES will be used later for the LARGE DRAWER.
Step 2
A
B
Open end
Open end
Roller end
Roller end
Push the black lever in and pull the SLIDE from the RAIL.
BLACK 1/2" FLAT HEAD SCREW
(12 used in this step)
19
1
1
1
5
6
2
Page 7
