Step 8
Page 13
å
NOTE: The UPPER GUIDE (7) tabs should be down before
starting this step.
å
Insert the LOWER GUIDES (8) in the SLIDING DOOR (G)
at an angle into the groove in the BOTTOM (B). Then, tilt
the DOOR (G) up vertically. Push the UPPER GUIDE (7)
tabs up into the groove in the SHELF (A).
å
NOTE: The DOOR should slide freely in the track.
å
NOTE: The DOOR gap is adjustable. Turn the cam
on the LOWER GUIDES (8) with a STRAIGHT EDGE
SCREWDRIVER to adjust the door up or down.
B
A
G
The tab should
be down before
you insert it into
the upper track.
The tab should
be up after the
DOOR is in place.
7
8
G
G
A
B
