Step 28
Page 32
å
Push the RUBBER SLEEVES (2R) over the remaining METAL PINS (1R). Insert the METAL PINS into the hole locations of
your choice in the UPRIGHTS (D and E). Set the ADJUSTABLE SHELF (M) onto the METAL PINS.
å
To insert the drawer into your unit, tip the front of the drawer down and drop the rollers on the drawer behind the rollers on
the unit. Lift the front of the drawer up and slide it into the unit.
å
To insert the large drawer into your unit, line up the EXTENSION SLIDES on the drawer with the EXTENSION RAILS on the
unit and push the drawer into the unit until the drawer is fully inserted. The drawer will push in hard until it is all the way in,
then it will slide in and out easier.
å
Push a CAM COVER (36P) onto each visible HIDDEN CAM.
å
NOTE: Please read the back pages of the instruction booklet for important safety information.
å
This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry.
(4 used)
2R
1R
(6 used)
To cover HIDDEN CAMS
36P
70 lbs.
25 lbs.
total
30 lbs.
40 lbs.
M
25 lbs.
E
15 lbs.
