Mounting and Connection
1.
Remove the head of the siren from the base.
2.
Mount the base part on the wall, using 2 of the 4 markings marked on the base.
3.
Connect the cable according to the following diagram. The direction of the connection is important, the
siren of the panel must be connected to the Terminal 2 of the cable siren, and the cable siren to the
Terminal 4 of the siren.
4.
For the next siren, enter a cable from the existing siren 1 terminal into the siren terminal 2 of the next
siren. In the same way, you will remove the existing siren 3 from the terminal block and insert the cable
into the terminal block 4 of the next siren.
Test
1. Check if the siren fault occurs when the panel is started.
2. Make sure that the connections are made correctly if the siren is faulty.
3. If the siren does not give a fault and the panel supports it, bring it to the panel test position.
4. Run the siren test. Listen to the siren sound during the test period.
5. During the test, if the device sounds uninterrupted, the test is complete.
Manufacture
* 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal
waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase
of equivalent new equipment, or dispose of it at designated collection points. For more information see:
www.recyclethis.info.
Bilgi Elektronik San. ve Tic. A.Ş.
Dudullu Organize Sanayi Bölgesi 1. Cadde İsmet Tarman İş Merkezi
No:1 Kat:2 No:32 Ümraniye / İstanbul
/ Türkiye
Telephone:
+90 216 455 88 46
Fax:
+90 216 455 99 06
support@bilgielektronik.com.tr
