EQUIPMENT LOCATION SELECTION, INSTALLATION AND CONNECTION
1. To mount your device must be performed by authorized person.
2. Selecting the mounting location of the device:
-
From any device powered by natural gas will be far away at least 1.5 meters from the projection of a place.
-
In case of a gas leak it would be a likely place to be the most accumulation of gas.
-
The detector will
NOT
be over direct cooked meals, sink and toilet bowl (which should be at least 1.5
meters away).
-
The detector will
NOT
be adjacent Aspirator, fan and ventilation (which should be at least 1.5 meters
away).
3. Remove the head of the detector attached to base
by turning it counter clock wise until you reach the
short line on the base (1), then pull it off (2).
4. Use at least 2 opposite ones from 4 of the screw
holes on the base to fasten it.
