Http://www.czkaidi.com
- 3 -
8. Lock the Bottom stroke limit
Step
Operation
Motion
1
Press and hold
▲
or
▼
, then release
Run the legs to the position you want the table surface to be
2
Press and hold button S, then press and hold 1,
keep about 3 seconds
Letter “
_L_
” is indicated on the screen. That means the position is locked at the
lowest position that the table can be moved to
3
Release the buttons
Completed
1.Legs aren’t able to run below the locked position
2.Memory position(s) below the locked position will lost even after the table is unlocked, you need to follow SET MEMORY POSITIONS again to reset
these memory positions
3. Initialize will unlock the bottom limit.
9. Lock the top stroke limit
Step
Operation
Motion
1
Press and hold
▲
or
▼
, then release
Run the legs to the position you want the table surface to be
2
Press and hold button S, then press and hold 3,
keep about 3 seconds
Letter “
¯
L
¯
” is indicated on the screen. That means the position is locked at the
highest position that the table can be moved to
3
Release the buttons
Completed
1. Legs aren’t able to run above the locked position
2. Memory position(s) above the locked position will lost even after the table is unlocked, you need to follow SET MEMORY POSITIONS again to reset
these memory positions
3. Initialize will not unlock the top limit.
10. Unlock the top/bottom stroke
Step
Operation
Motion
1
Press and hold button S, then press and hold 2, keep
about 3 seconds
Letter “-C-” is indicated on the screen. That means the table’s unlocked and can be
moved in full range
2
Release the buttons
Completed
11. Adjust the sensitivity of gyro anti-collision
Step
Operation
Motion
1
Press and hold button S, for about 5 seconds
“
———”
is flashing on the screen.
2
Lossen the button “S”, press button “3” in 6
seconds.
“
G
—
2
”
is flashing on the screen shows the sensitivity is level 2
3
Press
∧
or
∨
to change the sensitivity.
The sensitivity has four levels
：
“
G
—
0
”
、
“
G
—
1
”
、
“
G
—
2
”
、
“
G
—
3
”
,
“
G-4
”
,
G-0 shows the sensitivity is useless, G-4 shows the highest sensitivity.
4
Press button S for more than 2 seconds.
Finish the setting
Whatever current sensitivity level setting is, every time the resetting of the sensitivity is level 2.
