10.2022 DIGITAL LOCKS & KEYS
8
in assigned functionality
4a
4b
3
1a
1a
2a
2
2b
1b
1b
1
2
4a
4b
3
1a
1a
2a
2
2b
1b
1b
1
2
4a
4b
3
1a
1a
2a
2
2b
1b
1b
1
2
Assign User Codes:
Assign User Keys:
Press . The LED will flash.
While the LED is flashing, insert a valid Manager Key.
A two-tone beep will be heard, and the LED will turn on.
Go to a lock already programmed to
operate with the user credentials and
Manager Keys. Press .
The LED will flash.
*The Programming Key will continue to function in Express Registration mode until it is used to operate a lock.
Insert the Programming Key to program
each lock to operate with the same user
credentials and Manager Keys. Two sets
of two-tone beeps will be heard, and
the LED will flash twice to indicate
successful programming.
While the LED is flashing, insert the
Programming Key. A two-tone beep
will be heard, and the LED will turn
off.
End Express Registration mode:*
Go to any programmed lock.
Press then insert the
Programming Key.
Press . The LED will flash.
While the LED is flashing, insert a valid Manager Key.
A two-tone beep will be heard, and the LED will turn on.
While the LED is on, press [new 4-7 digit code] . A two-tone beep will be
heard. Press [the same 4-7 digit code] . Two sets of two-tone beeps will be
heard, and the LED will turn off.
While the LED is on, insert a User Key. Two sets of two-tone beeps will be heard,
and the LED will turn off.
assign user credentials
express register user credentials and manager keys
Make sure that the lock is set for assigned use functionality (a green LED will flash when is pressed). Up to 20 user
credentials (User Codes and/or User Keys) may be assigned to each lock.
Make sure the lock is set for assigned use functionality (a green LED will flash when is pressed). The Programming Key
can quickly program multiple locks to operate with the same user credentials and Manager Keys.
