Tekno RC NB-48 Instruction Manual Download

Page: 33 / 36

TKR5300 Spare Parts List

TKR5300 - NB48 4WD Nitro 1/8th Scale Competition Buggy Kit

TKR5301 – Chassis (7075, 4mm, hard anodized, lightened, NB48)

TKR5302 - Differential Ring Gear (40t, rear, CNC, NB48)

TKR5310 – Center Differntial Mount (NB48, NT48)

TKR5314 - Brake Pad Set (4pcs, NB48, NT48)

TKR5316 – Rear GearBox (offset, rear, NB48, NT48)

TKR5317 – Radio Tray and Mud Guard Set (left/right side, NB48, NT48)

TKR5319 – Radio Tray Covers (NB48, NT48)

TKR5320 - Servo Horns (steering, throttle, NB48, NT48)

TKR5321 - Exhaust Wire Mount Set (CNC, NB48, NT48)

TKR5323 - Engine Mounts (CNC, NB48, NT48)

TKR5324 - Air Filter Set (hose, filter, housing, NB48, NT48)

TKR5331 - Throttle Pivot Ball Assembly (CNC, NB48, NT48)

TKR5336 – Throttle, Brake Linkage (NB48, NT48)

TKR5338 – Brake Levers, Brake Cam Stays (w/ pins)

TKR5340 - Fuel Tank (w/ clunk, NB48)

TKR5341 - Fuel Tank Post and Air Filter Hanger Set (NB48, NT48)

TKR5342 - Flywheel Cover Set (NB48, NT48)

TKR5345S - Brake Disc Set (steel, NB48, NT48, 2pcs)

TKR5350 - Flywheel (4-shoe)

TKR5351 - Clutch Shoes (7075, 4pcs, NB48, NT48)

TKR5353 - Clutch Springs and Hardware Set (NB48, NT48)

TKR5357 - Steering Servo Turnbuckle (NB48, NT48)

TKR5362 - Chassis Brace Set (NB48, NT48)

TKR5363 - Air Filter Foams (inner, outer, pre-oiled, 3pcs each, NB48, NT48)

TKR5376 - Driveshaft (center, rear, steel, NB48)

TKR5376A - Driveshaft (center, rear, aluminum, NB48)

TKR5377 - Driveshaft (center, front, steel, NB48, NT48)

TKR5377A - Driveshaft (center, front, alminum, NB48, NT48)

TKR5383 - Body (NB48, w/ window mask)

TKR5385 - Decal Sheet (NB48)

TKR4214 - Clutch Bell (14t, NB48)

TKR4215 - Clutch Bell (15t, NB48)

TKR5012 – Gearbox (front)

TKR5013 – Adjustable Hinge Pin Braces (rear, 7075 CNC, gun metal ano)

TKR5013B – Adjustable Hinge Pin Brace (+1.5 deg, rear, 7075 CNC, gun metal ano)

TKR5017 – Adjustable Hinge Pin Braces (front, 7075 CNC, gun metal ano)

TKR5018 – Front Bumper

TKR5020 – Hinge Pins (inner, front/rear)

TKR5021 – Hinge Pin Inserts, Wheelbase Shims (complete set)

TKR5026 – Wing Mount, Body Mount Set

TKR5027 – Shock Standoffs (2pcs)

TKR5028 – Shock Tower (front, 7075 NC, gun metal ano)

TKR5029 – Shock Tower (rear, 7075 NC, gun metal ano)

TKR5030XT – Suspension Arms (rear, 2pcs)

TKR5033 – Rear Arm Mud Guards

TKR5034 – Hinge Pins (outer, rear)

TKR5036XT – Suspension Arms (front, 2pcs)

TKR5037 – Wing (white)

TKR5037B - Wing (black)

TKR5037Y - Wing (yellow)

TKR5040 – Rear Hubs (2pcs)

TKR5041 – Spindles (left and right)

TKR5042 – Spindle Carriers (left and right)

TKR5049A – Pivot Balls (6.8mm, no flng, sway bar, shck ends, almnm, 4pcs)

TKR5050 – Turnbuckle (camber link, front/rear, 2pcs)

TKR5051 – Rod Ends (6.8mm, camber links, 8pcs)

TKR5052A – Pivot Balls (6.8mm, inside camber, strng links, aluminum, 4pcs)

TKR5053A – Pivot Balls (6.8mm, flanged, outside camber, aluminum, 4pcs)

TKR5054A – Spindle Bushings (4pcs, aluminum, hard ano)

TKR5055A – Arm Bushings (4pcs, aluminum, hard ano)

TKR5056 – Rod Ends (5.8mm, brake/steering/sway bar linkage, 8pcs)

TKR5058A – Pivot Balls (5.8mm, no flange, brake/strng link, aluminum, 4pcs)

TKR5070 – Stub Axles (hardened steel, 2pcs)

TKR5071 – Wheel Hubs (17mm, aluminum, black ano, w/pins, 2pcs)

TKR5071X – Wheel Hubs (17mm, aluminum, lightened, gun metal ano, w/pins, 2pcs)

TKR5071B – Wheel Hubs (17mm, alum, ltnd, gun metal ano, 1mm off, w/pins, 2pcs)

TKR5071C – Wheel Hubs (17mm, alum, ltnd, gun metal ano, 2mm off, w/pins, 2pcs)

TKR5072 – Driveshafts (f/r, hardened steel, 2pcs)

TKR5073 – CV Rebuild kit (f/r, for 2 axles)

TKR5075 – Diff Coupler (f/r, hardened steel)

TKR5079A – Stabilizer Balls (6.8mm, sway bars, aluminum, 4pcs)

TKR5080 – Sway Bar (f/r, 2.2mm)

TKR5081 – Sway Bar (f/r, 2.3mm)

TKR5082 – Sway Bar (f/r, 2.4mm)

TKR5083 – Sway Bar (f/r, 2.5mm)

TKR5084 – Sway Bar (f/r, 2.6mm)

TKR5085 – Sway Bar (f/r, 2.8mm)

TKR5086 – Sway Bar Mounts

TKR5087 – Sway Bar (f/r, 3.0mm)

TKR5100 – Ackerman Plate (aluminum, gun metal ano)

TKR101X - Servo Saver Spring (HD, EB48, SCT410, NB48)

TKR5102A – Steering Posts (aluminum, gun metal ano)

TKR5103 – Servo Saver Post (aluminum, gun metal ano)

TKR5104 – Steering Bell Cranks

TKR5107 – Steering Top Plate, Center Diff Top Plate, Center Diff Rear Support

TKR5116 – Wheel Nuts (17mm, serrated, gun metal ano, M12x1.0, 4pcs)

TKR5122 – Steering Rack Bushings (aluminum, gun metal ano, 2pcs)

TKR5123 – Turnbuckle (steering links, 2pcs)

TKR5125 – O-Ring (ESC tray, 3pcs)

TKR5126 – Antenna tube (universal, w/ caps, 5pcs)

TKR5231 – Servo Saver Nut and Spring

TKR5112X – Differential Outdrives (center, lightened)

TKR5113 – Differential Case (f/c/r)

TKR5114X – Differential Outdrives (f/r, lightened)

TKR5115 – Spur Gear (44t, hardened steel, lightened)

TKR5149 – Differential Cross Pins (6pcs)

TKR5150 – Differential Gear Set (internal gears only)

TKR5151 – Differential Ring Gear (40t, straight cut)

TKR5152 – Diff Pinion (10T, CNC, straight cut)

TKR5143 – Differential Seals (3pcs)

TKR5144 – Differential O-Rings (6pcs)

TKR5145 – Differential Shims (6x17mm, 6pcs)

TKR5148 – Complete Front Differential

TKR5389 – Complete Rear Differential

TKR5390 – Complete Center Differential

TKR5213 – Brake Posts (4pcs)

TKR5213A – Brake Posts (aluminum, 4pcs)

TKR5215 – Brake Cams (steel, 2pcs)

TKR5219 – Brake Linkage Ball Lever (steel)

TKR5057 – Turnbuckle (brake bias adjustment)

TKR6002 – Shock Body (front, aluminum, hard ano, 2pcs)

TKR6003 – Shock Caps (aluminum, black ano, 2pcs)

TKR6003B – Shock Caps (non-vented top, 2pcs)

TKR6004 – Shock Shafts (front, steel, 2pcs)

TKR6004T – Shock Shafts w/ TiNi coating (front, steel, 2pcs)

TKR6005 – Shock Rod Ends and Spring Perches (6.8mm, shock ends, 4pcs)

TKR6008 – Shock Shaft Guide, Piston, and Bushing Set (for 2 shocks)

TKR6009 – Shock O-Ring and Bladder Set (for 2 shocks)

TKR6009B – Shock O-Ring Set (16pcs, for 2 shocks)

TKR6009C – Shock Bladder Set (firm, 4pcs)

TKR6013 – Shock Adjustment Nuts (aluminum, gun metal ano, 2pcs)

TKR6015 – Shock Cartridge Caps (aluminum, gun metal ano, 2pcs)

TKR6016 – Shock Body (rear, aluminum, hard ano, 2pcs)

TKR6017 – Shock Shafts (rear, steel, 2pcs)

TKR6017T – Shock Shafts w/ TiNi coating (rear, steel, 2pcs)

TKR6018 – Shock Cap and Spring Adjuster Set (composite, for 2 shocks)

TKR6021 – Shock Set (front, complete)

TKR6022 – Shock Set (rear, complete)

TKR6023 - Shock Boot Set (2 front, 2 rear)

TKR6030 – Shock Spring Set (rear, 1.4 x 11.0T, 85mm)

TKR6031 – Shock Spring Set (rear, 1.4 x 10.5T, 85mm)

TKR6032 – Shock Spring Set (rear, 1.4 x 10.0T, 85mm)

TKR6033 – Shock Spring Set (rear, 1.4 x 9.5T, 85mm)

TKR6034 – Shock Spring Set (rear, 1.4 x 9.0T, 85mm)

TKR6035 – Shock Spring Set (front, 1.5 x 9.0T, 70mm)

TKR6036 – Shock Spring Set (front, 1.5 x 8.5T, 70mm)

TKR6037 – Shock Spring Set (front, 1.5 x 8.0T, 70mm)

TKR6038 – Shock Spring Set (front, 1.5 x 7.5T, 70mm)

TKR6039 – Shock Spring Set (front, 1.5 x 7.0T, 70mm)

TKR6055 – Shock Spring Set (rear, 1.4 x 8.5t, 80mm)

TKR6056 – Shock Spring Set (rear, 1.4 x 8.0t, 80mm)

TKR6050 - Shock Pistons (CNC, conical, 10x1.1mm)
TKR6051 - Shock Pistons (CNC, conical, 8x1.3mm)

TKR6052 - Shock Pistons (CNC, conical, 10x1.2mm)

TKR6053 - Shock Pistons (CNC, conical, 8x1.4mm)

TKR6054 - Shock Pistons (CNC, conical, 10x1.3mm)

TKRBB050825 – Ball Bearing (5x8x2.5mm, 4pcs)

TKRBB05114 – Ball Bearing (5x11x4, 4pcs)

TKRBB05115 – Ball Bearing (5x11x5, 4pcs)

TKRBB05134 – Ball Bearing (5x13x4, 4pcs)

TKRBB06103 – Ball Bearing (6x10x3, 4pcs)

TKRBB08144 – Ball Bearing (8x14x4, 4pcs)

TKRBB08165 – Ball Bearing (8x16x5, 4pcs)

TKRBB13194 – Ball Bearing (13x19x4, 4pcs)

TKR1200 – M2.5 Locknuts (zinc finish, 10pcs)

TKR1201 – M3 Locknuts (black, 10pcs)

TKR1202 – M4 Locknuts (black, 10pcs)

TKR1211 – M3 Locknuts (flanged, black, 10pcs)

TKR1221 – M3x8mm Washer (black, 10pcs)

TKR1222 – 13x16x.1mm Diff Shims (10pcs)

TKR1235 – Body Clips (10pcs)

TKR1227 - M4x9mm Washer (zinc finish, 10pcs)

TKR1322 – M3x8mm Flat Head Screws (black, 10pcs)

TKR1323 – M3x10mm Flat Head Screws (black, 10pcs)

TKR1325 - M3x14mm Flat Head Screws (black, 10pcs)

TKR1327 - M3x16mm Flat Head Screws (black, 10pcs)

TKR1328 - M3x18mm Flat Head Screws (black, 10pcs)

TKR1333 - M3x40mm Flat Head Screws (black, 10pcs)

TKR1341 - M4x6mm Flat Head Screws (black, 10pcs)

TKR1343 - M4x10mm Flat Head Screws (black, 10pcs)

TKR1346 - M4x15mm Flat Head Screws (black, 10pcs)

TKR1401 - M3x6mm Button Head Screws (black, 10pcs)

TKR1402 - M3x8mm Button Head Screws (black, 10pcs)

TKR1407 - M3x16mm Button Head Screws (black, 10pcs)

TKR1443 - M4x10mm Button Head Screws (black, 10pcs)

TKR1445 - M4x14mm Button Head Screws (black, 10pcs)

TKR1447 - M4x16mm Button Head Srews (black, 10pcs)

TKR1448 - M4x18mm Button Head Screws (black, 10pcs)

TKR1522 - M3x8mm Cap Head Screws (black, 10pcs)

TKR1524 - M3x12mm Cap Head Screws (black, 10pcs)

TKR1525 - M3x14mm Cap Head Screws (black, 10pcs)

TKR1529 - M3x20mm Cap Head Screws (black, 10pcs)

TKR1601 - M3x4mm Set Screws (black, 10pcs)

TKR1603 - M5x4mm Set Screws (black, 10pcs)

Summary of Contents for NB-48





































Search results

Summary of Contents for NB-48

Reviews:

Related manuals for NB-48

Brands by name

Popular brands

Tekno RC NB-48, Instruction Manual

Search results

Summary of Contents for NB-48

Reviews:

Related manuals for NB-48

Brands by name

Popular brands