TKR1201
TKR1211
TKR1529
TKR1534
Step
G-3
1
2
3
4
5
6
7
8
9
10
Stock position is 9/B
29.50mm
Note: Notch always
goes on left side of vehicle.
Actual Size
Step
G-4
Build Note: Hold the turnbuckle stationary
with pliers and push the rod end hard onto the
turnbuckle while turning at the same time.
Keep in mind that one end of the turnbuckle has
normal threads and the other has reverse threads.
Start the rod end straight and it will thread on straight.
Build Tip: Use some grease or Chapstick
on the threads to help prevent “pop-off” when
adjustments are being made.
Right
Left
TKR8052A
TKR5187B
TKR8052A
TKR5187B
TKR5187B
TKR9050
TKR9050
TKR5187B
TKR8052A
TKR8052A
Bag G
Rear Camber Links
Note: These offset rod ends may be required
if running excessive droop. Install on hub
side for clearance inside the wheel. These
are located inside bag S.
10
TKR1201
M3 Locknut Black
x2
TKR1211
M3 Lock Nut Flange Black
x2
TKR1529
M3x20mm Cap Head Screw
x2
TKR1534
M3x22mm Cap Head Screw
x2
