Stock Position
30.2
Stock Position
(Outer)
TKR1601
TKR1601
TKR1601
TKR5086
TKR5081 - 2.3mm
TKR5086
Install the Sway Bar Ball onto the
Sway Bar Wire until the end of
the wire is flush with the ball as
picture above.
Loosen the M3x4 set screw
(TKR1601) if the anti-roll bar
does not turn freely.
Note: Do not over-tighten
TKR1601
TKR1522
TKR1522
M3x8mm Cap Head Screw
x2
TKR1601
M3x4mm Set Screw
x6
Bag G
Front End
(Option)
*TKR5080 - 2.2mm
*TKR5082 - 2.4mm
*TKR5083 - 2.5mm
*TKR5084 - 2.6mm
*TKR5085 - 2.8mm
*TKR5087 - 3.0mm
Step
G-1
Step
G-2
Step
G-3
Thread
Lock
11
TKR1327
TKR1333
M3x40mm Flat Head Screw
x2
TKR1443
M4x10mm Button Head Screw
x2
TKR5049
Pivot Ball Sway Bar
x2
TKR5079
Stabilizer Ball
x2
TKR1525
M3x14mm Cap Head Screw
x2
TKR1327
M3x16mm Flat Head Screw
x2
TKR1333
TKR1443
TKR1525
(Inner)