background image

TKR5575

TKR5016

TKR5110

TKR5016

TKR5529

TKR1222

TKR1222

TKR1525

TKR1222

TKR1525

M3x14mm Cap Head Screw

x4

TKRBB05114

Ball Bearing (5x11x4)

x2

 

TKR1603

M5x4mm Set Screw

x1

TKR1222

13x16x0.1mm Diff Shim

x2

TKR1226

5x7x0.2mm Shim

x1

TKR1603

TKRBB05114

TKRBB05114

TKR1226

TKRBB05114

TKR1603

TKR1525

TKR1525

Grease

Note: TKR1222 and TKR1226 Shims - The gear mesh should be tight without any binding. TKR1226 should

always be installed.  Then test fitment of the diff with both TKR1222 shims on the gear-side of the diff. If the diff

turns freely without binding, continue to next step.  If the diff binds and does not turn freely (it will make a

grinding or crunching sound when spun), remove one TKR1222 shim from the gear side and install it onto the

other side of the diff. Reassemble and test the mesh again.  If it is still binding, remove the second TKR1222 shim

from the gear side and install it onto the other side of the diff.  When you are satisfied that you have the best

gear mesh possible continue to the next step. You may end up using only one shim on the gear side.

                                

Front

Rear

Note: The front and rear of

the car use different inner

bulkheads. The front is angled 

whereas the rear is straight.

Note: flat spot

Note: flat spot

*TKR5575X

(Option)

*TKR5029

(Option)

Bag D

Rear Gearbox
(overview)

6

Step

D-1

Step

D-2

Step

D-3

Thread

Lock

Summary of Contents for SCT410 X





























Reviews: