.SET-OUTPUT
The user can point to this menu by up/down buttons and by selecting this menu user can set the
outputs parameters as below:
1.
Modulation
In this menu user can select the output modulation type DVB- C or T by pressing the
right button the modulation type will be set as fig-3.
fig-3.
2.
BW/Symbol Rate
If the output modulation type is set as DVB-T in this menu the output bandwidth will be
select as around 8, but if the output modulation selected as DVB-C the symbol rate
should be selected as around 6.96 Msb/s by pressing the right button(fig-4) the user can
exit from this menu by pressing the back button .
fig-4
