5-1
5. ONBOARD INTERCONNECTIVITY
The TEK-CPCI-1003 is not only a matter of computation power. The board also provides a
high capability to interface with peripherals through three integrated chipsets:
. Host-to-PCI bridge - 443BX from Intel: interface with the processor (host), system
memory, video controller, and Primary PCI bus (3.3V / 33MHz).
. PCI-to-PCI bridge - 21150 from DEC: manage the PCI bus signals on J1 and J2 CPCI
connectors. When used with a CompactPCI backplane, the board can drive directly
up to seven CPCI slots in PCI bus Master configuration.
. PCI-to-ISA bridge - 82371AB PIIX4 from Intel: interface the ISA bus to the Primary
PCI bus.
n
Mobile Pentium
®
II processor
The TEK-CPCI-1003 system board supports 233MHz, 266MHz, and 300MHz Mobile
Pentium
®
II processors from Intel, which is the first implementation of the Pentium II
processor family optimized for the mobile platform.
It consists of a mobile Pentium
®
II processor core with an integrated second level cache
and a 64-bit high performance host bus (66MHz bus speed).
The processor interfaces to the 82443BX PCIset through the 64-bit low power GTL+ data
bus interface.
n
443BX PCIset
The 443BX integrates a 32-bit PCI bus arbiter, and is optimized for 66MHz, 64/72-bit
SDRAM memory control and data path. It also features the Accelerated Graphics Port
(AGP) interface with up to 133MHz data transfer capability for data transfers with the
video chip.
Summary of Contents for TEK-CPCI 1003
