Introduction 1
INTRODUCTION
The VIPer808 Single Board Computer is a high performance, fully IBM AT compatible,
PC/AT industrial single board computer. VIP stands for Very Integrated Processor. This
board includes the following features:
•
The VIPer808 supports the following microprocessors (maximum internal CPU clock
speed and CPU voltage are indicated):
-
AMD 486DX2SV running at 66 MHz (3.3V);
-
AMD 486DX4SV running at 100 MHz (3.3V);
-
AMD 5x86 running at 133 MHz (3.3V) ).
This processor is also referred to as a 486DX5;
- Intel 486DX running at 33 MHz (5V);
- Intel 486DX2 running at 66 MHz (5V);
-
Intel 486DX4 running at 100 MHz (3.3V);
-
SGS 486DX2V running at 66 MHz (3.3V);
-
SGS 486DX4V running at 100 MHz (3.3V).
•
Each microprocessor has Internal Cache Memory.
•
The VIPer808 board supports the 16-bit standard ISA bus.
•
BIOS is stored in a Boot-Block Flash device.
•
System memory can be configured from 1MB to 128MB of Dynamic RAM (DRAM)
with 36-bit modules installed on the board's two vertical, 72-pin SIMM sockets.
•
The VIPer808 is a multi-purpose computer board:
-
It can be used as a single board computer in conjunction with a passive backplane;
-
Or as part of a stand-alone system with no backplane.
•
The VIPer808 provides operating systems compatibility for: PC and MS-DOS,
Windows 95, Windows NT, OS/2 Warp, SCO UNIX, QNX, NOVELL and UnixWare.
Summary of Contents for VIPer808
