Post Codes & Error Codes F-6
POST
DESCRIPTION
CODE
88
Returned from CMOS setup program and screen is cleared.
About to do programming after setup.
89
Programming after setup complete.
Going to display power on screen message.
8B
First screen message displayed. <WAIT...> message displayed.
PS/2 Mouse check and extended BIOS data area allocation to be done.
8C
Setup options programming after CMOS setup about to start.
8D
Going for hard disk controller reset.
8F
Hard disk controller reset done. Floppy setup to be done next.
91
Floppy setup complete. Hard disk setup to be done next.
95
Init of different BUSes optional ROMs from C800 to start.
(Please see Section F.02 for details of different BUSes).
96
Going to do any init before C800 optional ROM control.
97
Any init before C800 optional ROM control is over.
Optional ROM check and control will be done next.
98
Optional ROM control is done. About to give control to do
any required processing after optional ROM returns control and enable external
Cache.
99
Any initialization required after optional ROM test over.
Going to setup timer data area and printer base address.
9A
Return after setting timer and printer base address.
Going to set the RS-232 base address.
9B
Returned after RS-232 base address.
Going to do any initialization before Coprocessor test.
9C
Required initialization before Coprocessor is over.
Going to initialize the Coprocessor next.
9D
Coprocesor initialized.
Going to do any initialization after Coprocessor test.
9E
Initialization after Coprocessor test is complete. Going to check extended
Keyboard, Keyboard ID and num-lock. Keyboard ID command to be issued
next.
A2
Going to display any soft errors.
A3
Soft error display complete. Going to set Keyboard typematic rate.
A4
Keyboard typematic rate set. To program memory wait states.
A5
Going to enable parity/NMI.
A7
NMI and parity enabled. Going to do any initialization
required before giving control to optional ROM at E000.
Summary of Contents for VIPer808
