KONA Mega Gateway User Guide
T0008387_UG
Version 1.0
TEKTELIC Communications Inc.
Page 10 of 20
Table 2: KONA Mega Gateway Interface Connector Types
Interface
Connector Type
Mating Connector
LoRa Antenna
N-Type female
Industry standard N-Type male
Cellular Antenna
N-Type female
Industry standard N-Type male
GPS Antenna
N-Type female
Industry standard N-Type male
Copper Ethernet
(CPC connector)
Circular plastic threaded,
RJ-45
Shenzhen Chogori Technology Co., Ltd. Approved
mating connector (p/n 33000111-02 or equivalent)
DC Power Input
(CPC connector)
Circular plastic threaded,
2 contact, DC power
Shenzhen Chogori Technology Co., Ltd. Approved
mating connector (p/n 23002211-02 or equivalent)
Earth Ground
1/4 - 20 UNC double hole Industry standard 2-
hole lug, 1/4 x 0.75” spacing
1.3
Specifications
The KONA Mega Gateway specifications are listed in Table 3.
Table 3: KONA Mega Gateway Specifications
Attribute
Specification
Dimensions
222.2mm (8.7”) wide x 101mm (4.0”) deep x 287.3mm (11.3”) tall
Weight
5.1 kg (11.3 lbs)
Operating Temperature
-40°C to 60°C (-40°F to 140°F) at sea level Including solar loading.
Relative Humidity
10% to 100%
Operating Altitude
-60 m to 4,000 m (-197 ft to 13,123 ft)
Power Input, Direct DC
48 VDC nominal, 37 to 57 VDC operating range (after 42 V maximum start-
up threshold).
Positive or negative ground referenced feed. SELV & LPS source required.
Maximum 10A input overcurrent protection.
Power Input, PoE
IEEE 802.3 at over all four pairs (Mode A + Mode B) required
Power Consumption
35 W maximum
Weather Tightness
UL Type 6 (IP-67)
Regulatory Compliance
CSA/UL/EN 62368-1, CSA/UL/EN 60950-1, CSA/UL/EN 60950-22CE
FCC Pt. 15 Class B
Surge Protection
All interfaces are protected to primary levels except for the 3G/4G modem
antenna port which supports local antenna mounting only or requires an
external surge suppressor.
