Technology Solutions
Instruction Manual
Tek-Flux 1400A
www.tek-trol.com
9
2.3.2
Electrode Material Selection
Electrode Material
Application
316SS
Used for measuring water, wastewater, inorganic acid, organic
acid or another corrosive medium.
Hastelloy-C
Used for measuring oxidizing acid such as nitric acid, mixed
acid, and vitriol mixed liquid, also oxydic salt such as Fe++,
Cu++, other oxidizing agent such as pypocholoride solution
whose temperature is higher than normal and seawater.
2.3.3
Lining Material
Lining
material
Main performance
Application scope
PTFE
•
Stable chemical performance, resists acid,
alkali, saline solution and organic solvent.
•
Does not resist the corrosion of chlorine
trifluoride, liquid oxygen at high flow rate
and ozone
•
Common wear-resisting property
-112°
F
to 248°
F
Highly corrosive
medium such as
concentrated acid
and concentrated
alkaline
Synthetic
rubber
•
Excellent elasticity, good breaking tenacity,
good wear- resisting property.
•
Resist acid solution, aqueous alkali and saline
solution at normal low concentration of acid
solution,
•
Not resist corrosion from oxidant medium
<176
°
F
Neutral abrasive
pulp, slurry and coal
slurry
2.3.4
Flow Range and Nominal Diameter Selection
Inch(mm)
Velocity
0.98 to 32.80 ft/sec
0.3 to 10 m/s
gal/min
m3/hr
1/2" (15)
0.8 to 28.2
0.19 to 0.64
1
"
(25)
2.4 to 77.9
0.53 to
17.7
2
"
(50)
9.4 to 312.6
2.13 to
71.0
3
"
(80)
23.9 to 796.9
5.43 to
181
4
"
(100)
37.4 to 1246
8.49 to
283
5
"
(125)
58.6 to 1946.1
13.3 to
442
6
"
(150)
84.1 to 2800.2
19.1 to
636
8
"
(200)
149.3 to 4975.2
33.9 to
1130
10
"
(250)
233.8 to 7793.1
53.1 to
1770
12
"
(300)
335.5 to 11183.3
76.2 to
2540
18
"
(450)
757.3 to 25184.4
172 to
5720
20
"
(500)
933.4 to 31128.3
212 to
7070
24
"
(600)
1347.3 to 44909.2
306 to
10200
28
"
(700)
1831.6 to 60979.7
416 to
13850
