Built-In security features
If no speci
fi
c password has been previously de
fi
ned, use the default password
DEFAULT.
6.
Select OK to turn the access protection on.
NOTE.
If Access Protection is On, the Firmware Update and the Service Menu
cannot be selected. To change the Access Protection to Off, you must enter the
password.
You can change the password when Access Protection is off. First, enter the
old password and push the OK bezel button. Then enter the new password. The
password must be 7 characters.
For information about changing the password, refer to the Quick Start User
Manual for your product.
For information about the Service Menu, refer to the AFG2000 Series Arbitrary
Function Generators Service Manual.
6
AFG2000 Series Declassi
fi
cation and Security Instructions
