Run application software
Use
ST1G
or
ST6G
Serial Protocol Trigger Software to trigger and decode NRZ serial data (ST1G) and 8B/10B data on
high-speed serial or data protocols (ST6G). Protocol triggering up to 6.25 GS/s (with ST6G).
Use
SVP
,
SVM
, and
SVE
Spectral Analysis application to validate wideband designs and characterize wideband
spectral events.
Use
SVO
for
fl
exible OFDM analysis, requires SVE.
Use
SVT
for settling time measurements (frequency and phase), requires SVE.
Use
USB
to characterize USB 2.0 signals including mask testing and parametric testing.
Use
USB3
to verify, characterize, debug, and compliance test USB 3.0 systems (requires option DJA).
Use
VET
to enable visual trigger and search.
Use
XGBT
for 10 GBASE-T Ethernet physical medium attachment (PMA) physical-layer (PHY) electrical compliance
testing.
Follow the instructions provided with the
application software to install it. To run the
software, select
Analyze
and then select the
application.
MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series User Manual
167
