Acquisition
5.
To move a channel within the bus, scroll
to and select the channel you want to
move, and then click the up or down
arrow buttons.
6.
To remove a channel within the bus,
scroll to and select the channel you want
to remove, and then click the
Remove
button.
7.
To set channel thresholds, click the
Thresholds
Setup
button.
8.
For each threshold you want to set,
double click the channel Threshold, and
enter the threshold using the keypad or
multipurpose knobs.
9.
When the desired thresholds have been
set, click the
OK
button.
10.
To set all channels to the same threshold,
double click
Digital Threshold
and use
the keypad to enter a threshold. Then
click
Apply
.
11.
On MSO70000C/DX instruments, to set
the clock source and polarity, double click
the item and select from the displayed
list. To set the clock level, double click
the Clock Level, and enter the level using
the keypad or multipurpose knobs.
MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series User Manual
57
