Pinpoint triggers
Trigger Type
Trigger Conditions
Comm
Trigger with mask testing on communications codes and standards (analog channels
only). The controls work together to de
fi
ne the parameters for the trigger event
(available with Option MTM or MTH on some instruments). This mode includes clock
recovery. Push the Push to Set 50% knob to reinitialize clock recovery.
Bus
Trigger on components (such as a speci
fi
ed address) of a bus that you de
fi
ne.
With some instruments and options, trigger types include parallel, SPI, RS-232,
USB, and I
2
C triggers.
Not recommended with iCapture inputs if using more than one source or an external
trigger.
Video
Trigger on speci
fi
ed
fi
elds or lines of a composite video signal (DPO7000C,
MSO5000B, and DPO5000B Series only). Only composite signal formats are
supported.
CAN
Trigger on CAN Bus signals.
Not recommended with iCapture inputs if using more than one source or an external
trigger.
MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series User Manual
73
